Be tempted to unleash your innermost desires with the ZALO Temptation Pre-Heating Bullet Thruster. Designed to slip intimately inside you to deliver gentle, passionate vibrations controlled by a linked handheld remote, the Temptation's intelligent auto-thrusting functionality allows you to experience deep pleasure. A whisper-quiet motor, ornate jewelry-inspired details and silky smooth Softek coating come together for the ultimate sensory experience.
With six different thrusting modes to choose from and a pre-heating function that ensures your toy is at perfect body temperature for every use, the Temptation is far too tempting to resist.
Please see the Usage tab for how to use information.
WARNING: This product is intended for individuals 18 years of age or older.
Preheating before use (optional): Temptation is designed to safely preheat before use. Hold the unit with the gold interface upright so the crown button is on top. To start, press the right arrow button once. The entire backlight will illuminate which means the Temptation is in "standby mode." Then press once the flame button located on the bottom of the interface. Orange light indicator located under the interface will begin to flash letting you know the preheating of desire has begun. Once the flashing stops, the Temptation has reached its maximum body-safe temperature of 107 Degrees or nearly 42 Celsius. You may interrupt the preheating at any time depending on your personal preference. Press the flame button for 3 seconds to stop the preheating. Note: Once you turn on the thrusting function, the preheating stops.
Turning on: To start using your Temptation, it must first already be in standby mode. Press right arrow button once to enter standby mode. The entire backlight will illuminate. Press right arrow button again to activate thrusting function. Press buttons and to choose from 6 pre-set thrusting modes. Switching to turbo mode: Press the crown button to activate the turbo mode.
Turning off: Press the left arrow button for 3 seconds or repeatedly.
Charging: First, open the silicone charging plug at the back of the unit. Then, plug one end of the charging cable into the charging port and the other end into a USB interface of a computer or a phone charger (not fast chargers!). A flashing indicator light means the unit is charging. Charging is complete when indicator light stays on. If the indicator light flashes quickly after startup, this means that battery is low and the product needs to be recharged.
Failed startup or vibration: Battery exhausted, please recharge. Please unlock the travel lock. The indicator light does not flash after the charging cable is connected: Please reconnect or rotate the charging cable making sure that the charging cable is inserted into the charging port correctly. Battery still empty, please try again in a few minutes.
ZALO recommends that you not use a silicone-based lubricant with your ZALO product. A water-based lubricant is the safest option. Always clean your ZALO thoroughly before and after each use. Avoid getting water in the DC socket. It is suggested that the product should not be used for more than 30 minutes at a time. Water-resistant, but should not be immersed in water. Keep the product away from magnetic cards, watches and other electronic devices. Never use cleansers containing alcohol, petrol or acetone. Avoid leaving your ZALO in direct sunlight and NEVER expose it to extreme heat. Store your ZALO in a dust-free place, preferably in your ZALO sating storage pouch, and keep it away from toys of other materials.
It is suggested that the product should not be used for more than 30 minutes at a time. Please seek medical advice immediately if the product slides into your body and cannot be taken out.